6
500
MM
HEAVY DUTY PEDESTAL FAN
50
FAN
12) Height Adjustment
Caution:
Ensure the unit is turned OFF and unplugged, and the fan blades (6) are stationary prior to making any adjustments.
1.
To adjust the fan Height; rotate the locking ring (7) on the telescopic stand (8) anti-clockwise (Fig.6a), this will allow you
to move the head up and down to the desired height (Fig.6b).
2.
Once you have the fan at the desired height, rotate the locking ring (7) in a clockwise direction and firmly tighten (Fig.6c).
3.
Plug the unit back in and turn ON to the desired speed.
13) Care & Maintenance
Caution: Prior to making any adjustments ensure the unit is turned OFF and unplugged, and the blades are stationary.
1.
Disconnect the unit from the wall socket prior to cleaning the unit.
2.
Remove the front safety grill (1), by unclipping the safety grill retaining clips located on the outer rim of the front and
rear safety grills (1 & 2) (Fig.7a & Fig.7b).
3.
Remove the retaining bolt located on the bottom of the safety grill using a phillips head screwdriver
(not provided) (Fig.7c).
4.
Clean the fan only with a slightly damp, soapy cloth, but ensure it is not too wet. After wiping down the unit with the
soapy cloth, dry any wet spots with a dry paper towel or dry clean cloth.
5.
Do Not spray or rinse with any form of liquid and/or detergents.
6.
To remount the front and rear safety grills do the reverse action to steps 2-3.
7.
Store the fan in a clean dry area when not in use.
8.
To prevent excess build up of dust and debris on the fan blade and grills purchase the optional accessory KP1001
500mm fan cover from your retailer (Fig.7d).
The fan cover will prevent dust build up leading to less cleaning of the fan blades and fan grills being required.
(Fig.6a)
(Fig.6c)
(Fig.6b)
(Fig.7a)
(Fig.7b)
(Fig.7c)
(Fig.7d)
Summary of Contents for KP1012
Page 8: ...www kincrome com au...
