kincrome KP1012, Manual

Page: 4 / 8

4
500
MM
HEAVY DUTY PEDESTAL FAN
50
FAN
5) Icons on Product
The following symbols are shown on the tool:
The Pedestal Fan is intended for indoor use only.
Read the instruction manual before use.
Warning
Electromagnetic compliance (C-Tick)
6) Unpacking
Unpack all the components from the box.
When unpacking the KP1012 500mm Heavy Duty Pedestal Fan, carefully inspect for any damage that may have occurred
during transit.
Check for loose parts, missing parts or damaged parts.
1. Ensure all packaging materials are disposed of as per your local council guide lines.
7) Assembling the Anti-Trip Base to the Telescopic Stand
1.
2.
3.
Place the anti-trip base (9) on the floor, with the screws facing upwards (Fig.1a) , remove the 4 inner screws located
on the anti-trip base with a phillips head screw driver (not provided) (Fig.1b).
Once they have been removed, align the telescopic stand (8) square base with the 4 screws you removed in step 1,
then reinstall the 4 screws to secure the telescopic stand (8) to the anti-trip base
(9) and tighten the screws (Fig.1c).
Once the telescopic stand (8) has been secured to the anti trip base (9), pull down the shroud cover, to
hide the screws (Fig.1d).
8) Assembling the Fan Motor to the Telescopic Stand
1.
2.
Allign the Fan Motor mounting bracket located at the bottom of the fan motor (4) onto the top of the telescopic
tube (8) (Fig.2a).
With the two screws supplied, secure the fan motor (4) to the telescopic stand (8) using a phillips head
screwdriver (not privided) (Fig.2b).
(Fig.2b)
(Fig.1a) (Fig.1b) (Fig.1c) (Fig.1d)
(Fig.2)