21
Operation – Using the Sprayer
Step 1: Operate the boom kit.
WARNING
ALWAYS wear personal protective equipment as directed on the
chemical label when spraying.
Long pants and sleeves, chemical-resistant gloves, and eye protection are
strongly recommended. Additional protective gear may be required
depending on the particular pesticide.
1. Review safety
information
Review the "Operation – Important Safety Information"
related to Chemical
Application Safety and ATV Vehicle Handling Safety provided in this manual.
2. Wear personal
protective
equipment
Wear personal protective equipment as directed on the chemical label.
3. Close
broadcast/
boom valves
Close broadcast/boom valves to prevent accidental spray release.
4. Turn on power Turn on the power to the sprayer.
1. Verify the remote switch is connected to the pump power cord.
2. Turn the remote switch to the "ON" position.
Note: The pump will start automatically when power is turned on.
Detail view
closed valve position
Closed Boom
Valves
Summary of Contents for K16130
Page 1: ......
Page 3: ...2 Hazard Signal Word Definitions ...
Page 27: ...26 Exploded View Parts List Fig06550 ...
Page 31: ...30 ...
