kincrome K16130, Owner'S Manual

Page: 17 / 31

16
Assembly
Step 6: Check and test completed assembly.
1. Test with water Test the system for leaks with water:
a) Partially fill the tank with water.
b) Connect the remote switch to the pump power cord and turn the remote
switch ON. The pump is an "on demand" pump. When turned on, the
pump will prime itself, and then turn off. When the gun trigger is
squeezed, the pump will automatically start.
c) Operate the spray gun by squeezing the gun trigger.
d) Operate the broadcast nozzles by opening the boom valves.
e) Check for leaks throughout the system. If a leak is detected, fix the leak
and re-test the system with water until no leaks are detected.