3
1/2” DRIVE AIR IMPACT WRENCH
4) Service
a. Tool service must be performed only by qualified repair personnel.
b. When servicing a tool, use only identical replacement parts. Use only authorized parts.
c. Use only the lubricants specified by the manufacturer.
5) Additional Safety Warnings
a. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may
occur.
It must be understood by the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
b. Only use with accessories rated to handle the forces exerted by this tool during operation.
Other accessories not designed
for the forces generated may break and forcefully launch pieces.
c. Attach all accessories properly to the tool before connecting the air supply.
A loose accessory may detach or break during
operation.
d. Thoroughly read and understand the manual for the air compressor used to power this tool. Install an in-line shutoff
valve to allow immediate control over the air supply in an emergency, even if a hose is ruptured.
e. Use this tool with both hands only. Using tools with only one hand can result in loss of control.
f. Do not lay the tool down until it has come to a complete stop.
Moving parts can grab the surface and pull the tool out of
your control.
g. Do not force the tool. Use a larger one if needed.
h. Use a torque wrench to verify tightness of all fasteners after use
(If required).
i. Do not hold sockets, anvil or adapters during use.
j. Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and then have
regular medical check-ups to ensure medical problems are not being caused or worsened from use.
Pregnant women
or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or
Raynaud’s Disease should not use this tool. If you feel any symptoms related to vibration (such as tingling, numbness, and
white or blue fingers), immediantly discontinue use and seek medical advice as soon as possible.
k. Do not smoke during use.
Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration
related injury.
l. Wear suitable gloves to reduce the vibration effects on the user.
6) Description of Symbols
The following symbols could be shown on the tool:
Read the instruction manual before use.
Risk of Explosion
Wear Ear Protection
Wear Eye Protection
no
No-load speed, Free Speed
CFM
Cubic Feet per Minute flow
.../min, RPM
Revolutions or reciprocation per minute
SCFM
Cubic Feet per Minute flow at
standard conditions
PSI
Pounds per square inch of pressure
NPT
National pipe thread, tapered
ft-lb
Foot-pounds of torque
BPM
Beats/ Blows per minute
Nm
Newton meters of force
BSP
British standard pipe
Summary of Contents for K13204
Page 8: ...www kincrome com au...