kincrome K12175 Manual Download Page 5

5

ENGINE LEVELLER 680KG

Working on an Engine

Any engine being supported by an Engine Leveller creates a potentially hazardous working environment.

Never place any part of your body beneath an engine supported by an Engine Leveller. Work should only be 
attempted on the removed engine once it is no longer supported by a lifting device, either securely attached to an 
engine stand or other suitable supporting device.

Maintenance and Storage

Lubricating

Moving parts on Engine Leveller should be lubricated occasionally with a light machine oil to maintain efficient 
operation.

Cleaning

Engine Leveller should be wiped clean with soft cloth only. Do not use gasoline, kerosene, or other such solvents or 
any abrasive cleanser.

Warranty given by Kincrome Australia Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria (Tel 1300 657 528). The applicable warranty 

period (12 months) commences on the date that the product is purchased. If this product has materials or workmanship defects (other than defects 

caused by abnormal or non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one 

of Kincromes addresses for repair or replacement. Your rights under this warranty are in addition to any other rights you have under the Australian 

Consumer Law or other applicable laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are 

entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled 

to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For further 

details please visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes 

differ from the one shown on the packaging.

Australian Office Contact Details

Phone: 

1300 657 528

Fax: 

1300 556 005

Email:

 [email protected] 

Website:

 www.kincrome.com.au

UK Office Contact Details

                 Mail: 

Kincrome UK Ltd PO Box 646 

Eastleigh S050 ONA

Email:

 [email protected] 

Website:

 www.kincrome.co.uk

Summary of Contents for K12175






Reviews: