11
HYDRAULIC GARAGE JACKS
TROUBLESHOOTING
Symptom
Cause
Remedy
Jack will not lift vehicle.
1. Release Valve is not fully closed.
2. Air Trapped in Hydraulic system.
3. Oil level too low.
1. Close Release Valve firmly.
2. Bleed system - Bleeding / Venting
Trapped Air on page 4.
3. Top-up to correct level.
Jack will not hold vehicle.
1. Release valve is not fully closed.
2. Overvehicle condition
3. Air Trapped in Hydraulic system
4. Oil level too low.
5. Hydraulic unit malfunction
1. Close Release Valve (4) firmly.
2. Remedy overvehicle condition.
3. Bleed system - Bleeding / Venting
Trapped Air on page 4.
4.Top-up to correct level.
5. Contact Kincrome Customer Service
Jack will not lift smoothly or to
full height.
1. Oil level low.
2. Air Trapped in Hydraulic system.
1.Top-up to correct level.
2. Bleed system - Bleeding / Venting
Trapped Air on page 4.
Jack will not lower completely.
1. Release Valve not sufficiently open.
2. Reservoir overfilled
1. Slowly open Release Valve further.
2. Check oil level
Exploded Diagrams
K12167
NO. DESCRIPTION
QTY NO. DESCRIPTION
QTY
1
Handle Tube 1
1
23 Roller
1
2
Bolt
1
24 Spindle
1
3
Handle Sleeve
1
25 Tools Tray
1
4
Handle Tube 2
1
26 Lock Washer
4
5
Screw
1
27 Bolt
4
6
Handle Socket
1
28 Screw
4
7
Retaining Ring
1
29 Lock Washer
4
8
Nut
2
30 Bolt
4
9
Limiting Bar
2
31 Zerk
1
10 Lock Washer
1
32 Lifting Arm
Assembly
1
11 Bolt
1
33 Lifting Arm Shaft
1
12 Nut
2
34 Retaining Ring
2
13 Lock Washer
4
35 Screw
1
14 Caster
2
36 Adaptor
1
15 Frame
1
37 Pump
1
16 Adjustable Plate
2
38 Spring
2
17 Screw
2
39 Cotter Pin
1
18 Retaining Ring
2
40 Adaptor Rod
1
19 Front Wheel
2
41 Rubber Pad
1
20 Flat Washer
2
42 Bolt
1
21 Retaining Ring
2
43 Flat Washer
2
22 Retaining Ring
2
44 Lock Washer
1
