6.) Do not extend the height of the stand beyond its maximum height
7.) Check that no part of the underbody of the vehicle will foul as the vehicle is positioned on the stands
8.) SLOWLY lower vehicle down onto vehicle support stands.
9.) Lower jack so as saddle does not bear any weight but do not remove jack from jacking position.
Working on Vehicle
Any vehicle being supported by a jack or vehicle support stands creates a potentially hazardous working
environment.
Do not move or roll a jack that is supporting a vehicle. Never place any part of your body beneath a vehicle
supported by a jack use vehicle support stands. Be careful of forces applied to vehicle such as torque on a
nut or bolt. These forces could cause vehicle to become unstable on vehicle support stands if vehicle
support stands are not properly placed. Do not turn vehicle ignition or attempt to start any vehicle supported
by jack or vehicle support stands.
Lowering Vehicle
Before lowering vehicle, be sure area under and near vehicle is clear of all persons and obstructions.
1.) Re-position jack under same support area used to lift vehicle.
2.) Raise Jack until lifting saddle just makes contact with support area under vehicle.
3.) Check to be sure lifting saddle is centered under support area. Slowly lift vehicle off from vehicle support
stands.
4.) Remove vehicle support stands, setting them aside, well clear of vehicle.
5.) SLOWLY lower vehicle.
6.) Carefully control speed of descending vehicle. Lowering a vehicle too fast can cause property damage
or injury.
MAINTENANCE AND STORAGE
Cleaning
Vehicle support stands should be wiped clean with soft cloth only. Do not use gasoline, kerosene, or other
such solvents or any abrasive cleanser as cleaning agents and solvents will cause deterioration of the rust
protection coating.
Storage
Store vehicle support stands level, in a clean environment preferably indoors, in a dry area to protect stands
from moisture.
Repairing
There are no user serviceable parts. Only trained, licensed and certified repair personnel should attempt
any repairs or replacing of parts. Any modifications to this product, except those performed by the
