Step 4: Choose “TCP Server” for the
【
Work Mode
】，
instead of “UDP”
Step 5: Make sure keeping the others unchanging, meanwhile remember the IP Address and Port
The IP and port will be required as following; you can open the tool and check back when you forget.
Step 6: Click
【
Modify Setting
】
to finish the setup, then power off the device and power on again.
You may not close the Vircom network tool program in case you want to check the IP and Port.
1.4 The first time to use the program, double click
to install the ActiveX Installer.
1.5 Then double click
to open the program and setup the configuration
Step 1: Choose
【
System
】
-
【
Parameter Config
】
