Step 2
After the connection, the height of the diaper table to the ground can be adjusted by
adjusting the insertion depth of the buckle position of the Support Stand(B), so as to
obtain the suitable height for use.
Step 3
1.Open the large
scissors-shaped bracket
first, and then hold the
snap box in the middle of
the load-bearing frame to
raise it to the highest point.
2.After lifting to the
highest point, push
outward the inner lock
keys on the left and right
sides to a limited position.
3.Then drop the bearing
frame to a horizontal
position.
4.If you need to fold it, you
need to hold the snap box
in the middle of the
load-bearing frame and
raise it to the highest point.
5.After lifting to the
highest point, press
inwards the colored
buttons on the left and
right sides to the lock key
to unlock.
6.Then press down the load
bearing frame to fold it.
05
Summary of Contents for RYT0366
Page 1: ...Diaper Changing Table RYT0366...
Page 8: ......