VGA/HDMI/DVI
User Manual
- 6 -
Operating the Monitor
3-1 Operating the Monitor
The LED OSD allows you to set up and configure the LED display.
Buttons
Functions
MENU
SELECT
Brings up the main menu.
EXIT/AUTO
Exits the current menu and returns to the previous
menu or exits the LED OSD.
Press AUTO for automatic configuration.
SL-/SL+
Moves the menu to make corresponding
adjustment.
LED state
Green: Running
Red: Power off or access nonstandard VESA signal
Flashing green: Energy saving mode or no signal
Press AUTO if the screen migrates after power on or under other
circumstances, then the screen auto-configures to its best display state.
Note:
It may not be adjusted to its best state if part of the display mode is
not standard VESA mode. If so, return back to OSD menu to RESET,
then it will revert back to normal.
It is recommended to set up the display mode at 1920×1080, refresh
rate at 60Hz.