8 Port /16 Port/24 Port/32 Port
User Manual
- 15 -
3.2 Operating the Monitor
Figure 3.3 Monitor adjust menu buttons
The LED OSD allows you to set up and configure the LED display.
Buttons
Functions
MENU SELECT
Brings up the main menu.
EXIT/AUTO
Exits the current menu and returns to the previous menu or
exits the LED OSD.
Press AUTO for automatic configuration.
SL-/SL+
Moves the menu to make corresponding adjustment.
LED state
Green: Running
Red: Power off or access non standard VESA signal
Flashing green: Energy saving mode or no signal
Press AUTO if the screen migrates after power on or under other circumstances, then the
screen auto-configures to its best display state.
Note:
It may not be adjusted to its best state if part of the display mode is not standard
VESA mode. if so, return back to OSD menu to RESET, then it will revert back to
normal.
It is recommended to set up the display mode at 1280x1024, refresh rate at 60Hz.
