Kimo VT 200, User Manual

Page: 6 / 16

6
Interchangeable measurement modules
1. Current / voltage module
Interchangeable modules with Smart-plus system are automatically recognized when connected to the instrument.
It allows current or voltage measurements on V/A1 or VA/2
channels with current/voltage input cables or ammeter
clamps.
2. Thermocouple module
It allows thermocouple temperature measurement on Tc1,
Tc2, Tc3 and Tc4 channels with type K, J or T with wire
thermocouple probes equiped with a miniature male
connector.
Wire probes with Smart-plus system
Wire probes with Smart-plus system are automatically recognized when connected to
the instrument.
mini-Din C1
connector
mini-Din C2
connector
Probes are connected on
min-DIN connectors
C1 and /
or C2
Wireless probe/instrument communication
Wireless communication between probe and instrument with automatic
recognition after power-up.
Secured Mini-Din Connector
Connections
II – Introduction
Non-exhaustive list of probes
Vane probes and PT100 probes are displayed on Vit, Tr1 or Tr2 channels
followed by wireless communication Reco
Wireless probes shall be located near the instrument for initial recognition. Connection between VT200
and wireless probes must be established. See submenu ''Wireless probes'' p 8.