
9.1 Solar cell
Spectral response
from 400 to 1100 nm
Nominal calibration coefficient
100mv for 1000W/m
2
Response in cosine
corrected until 80°
Coefficient in temperature
+0.1%/°C
Operating temperature
from -30°C to +60°C
Humidity dependence
100% RH
UV performance
excellent (PMMA filter)
Mode
photovoltaic
Surface active
1 cm
2
Material
Polycristallin silicon
Front face
Translucent PMMA
Tightness
Polyurethance resine and housing in PMMA and polyacetol
Cell weight
60 g
Cell dimensions
30 x 32 mm
10 Metrology
10.1 Traceability
The calibration of this instrument consists in determinate the calibration coefficient of the sensor by comparison to a standard radiometer linked to
the World Radiation Reference. A calibration certificate is supplied with the instrument..
10.2 Change the sensor
If you need to change the sensor, you can ask to the After-Sales Service to get a new one.
This sensor is supplied with a calibration certificate indicating its coefficient expressed in
µV/W/m2
.
To modify this
coefficient
and adapt this new sensor to the SL100 housing, you have to program its value by pressing
the following keys: several times.
Press
Val
to finalise the saving of this new calibration coefficient
Reminder
: in order to avoid any unwanted manipulation, an alert appears:
Caution! Modification.
Quit this function
pressing or .
10.3 Standard reference
This instrument is based on recommendations and requirements of the standard ISO9060 -1990: Solar energy - Specification and classification of
instruments for measuring solar radiation hemispheric and direct.
11 Delivery and packaging
•
SL100 housing
•
Silicium sensor and 1.25 metre of cable with mini -DIN connector
•
Transport case with foam protection
•
3 LR3-AAA batteries
•
Instructions for use
•
Calibration certificate
10
Calibration coefficient
+
-
Summary of Contents for SL 100
Page 1: ...Solarimeter SL 100...
Page 2: ......