SD-Card:Data__Select__
<0:Selection_disbld
SD-Card:Data__Read____
<NORMAL_OPERATION>
SD-Card:Data__Select__
<3:VsC_Type_______
SD-Card:Data__Read___
<32:Recip_Semihrmtc
SD-Card:Data__Select__
<4:VsC_Cylinders__
SD-Card:Data__Read___
<42:2 cylinders____
SD-Card:Data__Select__
<5:Supply_Voltage__
SD-Card:Data__Read____
<53:50_Hz_400_V____
OPERATION___________
REFRIGERATION SETUP_
COMPRESSOR SETUP _
SPECIAL ADJUSTMENTS_
SD-Card:Data__Select__
<0:Selection_disbld
SD-Card:Data__Read____
<NORMAL_OPERATION>
SD-Card:Data__Select__
<3:VsC_Type_______
SD-Card:Data__Read___
<32:Recip_Semihrmtc
SD-Card:Data__Select__
<4:VsC_Cylinders__
SD-Card:Data__Read___
<42:2 cylinders____
SD-Card:Data__Select__
<5:Supply_Voltage__
SD-Card:Data__Read____
<53:50_Hz_400_V____
OPERATION___________
REFRIGERATION SETUP_
COMPRESSOR SETUP _
SPECIAL ADJUSTMENTS_
SD-Card:Data__Select__
<0:Selection_disbld
SD-Card:Data__Read____
<NORMAL_OPERATION>
SD-Card:Data__Select__
<3:VsC_Type_______
SD-Card:Data__Read___
<32:Recip_Semihrmtc
SD-Card:Data__Select__
<4:VsC_Cylinders__
SD-Card:Data__Read___
<42:2 cylinders____
SD-Card:Data__Select__
<5:Supply_Voltage__
SD-Card:Data__Read____
<53:50_Hz_400_V____
OPERATION___________
REFRIGERATION SETUP_
COMPRESSOR SETUP _
SPECIAL ADJUSTMENTS_
SD-Card:Data__Select__
<0:Selection_disbld
SD-Card:Data__Read____
<NORMAL_OPERATION>
SD-Card:Data__Select__
<3:VsC_Type_______
SD-Card:Data__Read___
<32:Recip_Semihrmtc
SD-Card:Data__Select__
<4:VsC_Cylinders__
SD-Card:Data__Read___
<42:2 cylinders____
SD-Card:Data__Select__
<5:Supply_Voltage__
SD-Card:Data__Read____
<53:50_Hz_400_V____
OPERATION___________
REFRIGERATION SETUP_
COMPRESSOR SETUP _
SPECIAL ADJUSTMENTS_
SD-Card:Data__Select__
<0:Selection_disbld
SD-Card:Data__Read____
<NORMAL_OPERATION>
SD-Card:Data__Select__
<3:VsC_Type_______
SD-Card:Data__Read___
<32:Recip_Semihrmtc
SD-Card:Data__Select__
<4:VsC_Cylinders__
SD-Card:Data__Read___
<42:2 cylinders____
SD-Card:Data__Select__
<5:Supply_Voltage__
SD-Card:Data__Read____
<53:50_Hz_400_V____
OPERATION___________
REFRIGERATION SETUP_
COMPRESSOR SETUP _
SPECIAL ADJUSTMENTS_
SD-Card:Data__Select__
<0:Selection_disbld
SD-Card:Data__Read____
<NORMAL_OPERATION>
SD-Card:Data__Select__
<3:VsC_Type_______
SD-Card:Data__Read___
<32:Recip_Semihrmtc
SD-Card:Data__Select__
<4:VsC_Cylinders__
SD-Card:Data__Read___
<42:2 cylinders____
SD-Card:Data__Select__
<5:Supply_Voltage__
SD-Card:Data__Read____
<53:50_Hz_400_V____
OPERATION___________
REFRIGERATION SETUP_
COMPRESSOR SETUP _
SPECIAL ADJUSTMENTS_
Parameter 80: 8 0
0 0 0 0
1 1
VsC1
FsC2
FsC3
FsC4
FsC5
FsC6
FsC7
Press key „OK“ to enter the parameter input window. Skip to next digit with arrow keys „Left“ and „Right“ . Change
value of digit with arrow keys „Up“ and „Down“ . Every digit „1“ corresponds to a FsC in the rack system, as
shown below. The value of parameter 80 entered has to be confirmed with key „OK“.
2.3 Entering Setpoints
Select menu "REFRIGERATION SETUP" for entering setpoints. Use keys as described in 2.2 for setting the
relevant parameters.
Example: In a rack system with one Variable-speed Compressor (VsC1) and two Fixed-speed Compressors
(FsC2 & FsC3) parameter 80 has to be set to: 80000011
Connect start command (cable to terminal X13:2)
to start the system!
Please contact our
applications team for any
questions in planning or
commissioning under
or
tel +49 (0) 9131 – 934570
KIMO RHVAC Controls GmbH
| Hüttendorfer Weg 60 | D - 90768 Fürth, Germany
01117.144-172/08
2.2 Setting of number of fixed-speed compressors (FsC) in the rack system
The number of fixed-speed compressors (FsCs) has to be set in the next step. (If there is only one compressor,
please skip to 2.3). Go to menu COMPRESSOR SETUP.(You may also check VsC settings in this menu.)
Go to parameter
80:FsC PRIORITY CNTRL
for setting the number of fixed-speed compressors.
www.frigokimo.com
