Output1
Output2
IR In
IR Out
HDMI
Out
IR In
IR Out
DC/12V
Power
CAT In
RS232
Link
CAT Out
1
Quick Installation Guide
Ver. 1.0
All brand names and trademarks are properties of
their respective owners
2
3
4
SPECIFICATIONS:
CONNECTION DIAGRAM:
• 1 x HDMI Extender transmitter unit
• 1 x HDMI Extender receiver unit
• 1 x DC 12V/2A power supply (CW1202000EU)
• 2 x IR emitter (IRE 120cm with foam rubber)
• 2 x IR receiver (IRR 100cm with foam rubber)
• 2 x Phoenix Plug for RS232 cable termination
• 8 x Screws
• 1 x Instruction manual
• 4 x L shape stand feet
PACKAGE CONTENTS:
HDMI 2.0 Extender with Loop out, 60m
over network cable (Cat 6,6a, 7), UHD
4K2K/60 Hz 4:4:4
•
HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
•
4k2k@60Hz 4:4:4 signal extends distance up to 60 meters over a single Cat.6 cable
•
Supports Ultra HD resolution 4K2K@60Hz,4:4:4
•
Supports HDR(High Dynamic Range)
•
Bi-directional IR supported
•
Supports Local Loop Output and cascading
•
Support for mixing EDID for better compatibility
•
Offers simple and quick distribution for HDMI video signals - position your monitors
wherever you wish
•
Resolutions: 4K2K (60Hz), 4K2K (30Hz), 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
•
LED status display
•
Max transfer rate: 18 Gbps
•
Color depth: 12 bit
•
Supports compressed audio signals, such as DTS digital, Dolby digital (including
DTS-HD and Dolby True HD)
•
Supports uncompressed audio signals such as LPCM
•
Compact size, simple use and installation
•
Supports PoC (Power over Cable) function, it means that either Sender is powered
supply by a 12V power adapter, the other doesn’t need power supply.)
Performance
Support Video format
Support Audio format
HDMI Compliance
HDCP Compliance
Connectors on Transmitter
Input
Output
IR
Connectors on Receiver
Input
Output
IR
Environmental & Power Requirements
Operating temperature
Operating and storage
humidity
4K2K (60HZ), 4K2K (30HZ),
480i/480p/576i/576p/720p/1080i/1080p
LPCM; DTS Digital, Dolby Digital (including
DTS-HD and Dolby True HD)
HDMI 2.0
HDCP 2.2/HDCP1.4
1xHDMI port
1x RJ45 output , 1xHDMI port
Support 20K-60KHz
1x RJ45 input
Support 20K-60KHz
0 to +40
℃
Range 5 to 90%RH (No Condensation)
Loop Out
HDMI In
IR In
IR Out
HDMI Out
CAT Out
IR In
IR Out
DC/12V
CAT
RS232
Link
Power
DC/12V
CAT
RS232
Link
Power
1 Loop Out: Connect to a local HDMI display device such as UHD TV or Projector
2 HDMI In: Connect to HDMI source device such as DVD or PS4 player
4 HDMI Out: Connect to Remote HDMI display device such as UHDTV or Projector
5 IR In: Connect to wideband IR Receiver cable. The IR signal will send to the IR Out
port of another unit
6 IR Out: Connect to wideband IR Blaster cable. The IR signal is from the IR In port of
another unit
7 DC/12V: Plug DC 12V power supply into the unit and connect the adapter to AC
outlet.(Note: The extender supports PoC function, it meansthat either Sender or
Receiver is powered supply by 12V power adapter, the other doesn’t need power
supply.)
8 Power LED: The Power LED will illuminate when the unit is powered on.
9 Link LED: The Sender Link LED will illuminate When a valid connection has been
established for the Loop Out,and the ReceiverLink LED will illuminate When a valid
connection has been established for the HDMI Out
10
CAT: Connect Sender and Receiver over a nework cable(CAT.6,6a,7)
11
RS232: pass through the RS232 signal
CONNECTION DIAGRAM:
1
2
3
5
6
7
8
9
10
11
IR Blaster
IR Receiver
IR Blaster
IR Receiver
TX
RX
Connect to another
Receiver
DC 12V
Power Input
Cat.6/6A/7 Cable
Cat.6/6A/7
Cable
PC or Notebook
PC or Notebook
HDMI Source
PS3,PC,STB,
Blu-ray DVD player etc
TV-4K@60 4:4:4
TV-4K@60 4:4:4
TV-4K@60 4:4:4
HDMI Out
HDMI Out
HDMI In
INTRODUCTION:
This HDMI extender can be
e
xtends the maximum transmission distance for HDMI
signal
to up to 60m whereby only a simple network cable is used between a Sender
and
Receiver unit.
The
KIMEX
4K Extender Set, 4K60Hz 4:4:4 offers an extender solution of up to 60m for
the highest demands - both for high-resolution graphics and for absolutely smooth
video
playback. It consists of a transmitter as well as a receiver unit. It also includes two pairs
infrared units (transmitter, receiver) which enable the use of the remote realize
bidirectional control between Sender and Receiver.
The Transmitter have a Local Loop Output , You can monitor the playback status of the
device at locally. And the Receiver have a Loop Output with RJ45,then two or max. eight
receivers are cascaded, they can create a larger distribution and longer in length.
FEATURES:
1x RJ45 output , 1xHDMI port
3 CAT Out: Connect to another Receiver over a nework cable(CAT.6,6a,7)
4
