�
Scope of delivery
/
©
Horizontal aluminum bar: 2 pieces
@
Vertical aluminum bar: 2 pieces
@ Joins: 4 pieces
@ Hooks: quantity according to size
@ Wall ties: 2 pieces
0
canvas: 1 piece
@
Tool : 1
piece
î
@ PVC rods: 4 pieces
@ Screws for wall ties
rit 4 x 40mm: 4 pieces
@
Screws for joints
M5x8mm: 16 pieces
@ Notice
()
@ Anchors for wall
mounts:4
pieces
�
Assembly
I
1.
Lay the aluminum bars in parallel on a flat and soft surface (2 horizontal & vertical)
(Image 3). Fit them on the joints (Image 4,5 & 6)
{Image 3)
(
picture
5)
1/
(
picture
6)
2.
After step
6
(Image
6
) fit the remaining joints in the horizontal aluminum bars and
continue with the vertical aluminum bars (Image 7). Note: Carry out the manipulation
in pairs at the same time. Straighten the frame. Fix the M5x8mm screws in each hole.
Check the general assembly before tightening the screws (Image 8 & 9) {with a
tightening torque of 6 to 8 Nm)
(
picture
8)
( �. l
.
�
�/�
i-
V.
.
·'
(
pictur
e 9)
