Step 5
Now the slider frame has been inserted, check
and mark the height of the screw position on the
cupboard door, as shown in Figure 6. Use 2 screws
in each bracket to fix the door into position.
Note:
Now the door can be installed on the frame. Small
adjustments can now be made to align door, then
tighten screws.
See Detail D on Step 6 if door alignment needs to be adjusted.
We recommend that 4 more screws can now be installed to
the door brackets for extra support.
Screws are suited to a
minimum door thickness of 16mm
Mark & Drill 4 x 2mm holes
for mounting bracket.
Figure 6.
IMPORTANT:
Please make sure that you allow for the thickness
of this timber when mounting the cupboard door.
CAUTION:
DO NOT DRILL THROUGH THE CUPBOARD!
Min. 460
