MONACO MK-II - INSTALLATION INSTRUCTIONS
7
Insert front fixing brackets as shown
(figure C). Use a Phillips screw driver
to secure fixing bracket to door.
Note: Do not drill through.
B
C
6
Check and mark the height of the screw positions in the
inner cupboard door, as shown (figure B). Use a 10 mm
drill bit and drill 10mm deep.
DOOR
16
15.5
15.0
16
32
47.5
409.5
32
31.5
31.5
409.5
4
Pull each side of the inner runner out as
shown. Place assembly frame runner cover
over runners.
Once both are in place gently push bin frame
back until you hear it click in place.
Move bin frame in and out to ensure the
runners have a smooth movement. If the
movement isn’t as desired then adjust before
proceeding to the next step.
5
Once you are satisfied with the runner
movement, tighten all screws as shown.
Note: At this point fit the lid between the
support brackets (Shown step 3).
