Alterna
™
5
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Customer Care.
Part No. 3073966 Revision
-
Assembly Instructions
Keyless Lock Programming
Tools Required
•
Pencil
•
Paper Clip
Figure A
Figure B
Figure C
LEARN
BUTTON
LED
Figure D
Self
-
Lock Mode
•
Press and hold the receiver learn button until the yellow
LED begins a
Three blink
pattern… then release.
(Figure A).
•
Enter the current Supervisor code and press the unlock
button. Wait for the green transmitter light to go out.
(Figure B).
Default supervisor code is
071856
.
•
Enter 2222 and press the lock button, If successful, the
green LED will flash twice on the Receiver Latch and the
green transmitter light will go out.
(Figure C).
Note: To convert back to passage mode enter 2222 and
press the unlock button.
•
Enter 9999 followed by the lock button to exit program-
ming. Wait for the green transmitter light to go out.
(Figure D).
•
Test the new Self
-
Lock Mode.
LEARN
BUTTON
LED
TRANSMITTER
LIGHT
TRANSMITTER
LIGHT
LED
TRANSMITTER
LIGHT
