Alterna
™
4
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Customer Care.
Part No. 3073966 Revision
-
Assembly Instructions
Keyless Lock Programming
Tools Required
•
Pencil
•
Paper Clip
Figure A
Figure B
Figure C
LEARN
BUTTON
LED
Figure D
User Code (Single Use Mode)
•
Press and hold the receiver learn button until the yellow
LED begins a
Three blink
pattern… then release.
(Figure A).
•
Enter the current Supervisor code and press the unlock
button. Wait for the green transmitter light to go out.
(Figure B).
Default supervisor code is
071856
.
•
Enter 1111 and press the lock button, If successful, the
green LED will flash twice on the Receiver Latch and the
green transmitter light will go out.
(Figure C).
Note: To convert back to non single use mode enter 1111
and press the unlock button.
•
Enter 9999 followed by the lock button to exit program-
ming. Wait for the green transmitter light to go out.
(Figure D).
•
Test the new single use mode before locking the cabi-
net.
LEARN
BUTTON
LED
TRANSMITTER
LIGHT
TRANSMITTER
LIGHT
LED
TRANSMITTER
LIGHT
