FingerVein Online
Installation and Programming Manual
Page
12 of 69
5.2. Connection details
J2 - Main Connector
Pin 1 - Do not connect
Pin 2 - Negative power supply pole (GND) (Pin no. 5 SubD connector)
Pin 3 - Signal Tx 232 to host (Pin no. 2 SubD female connector) or to the
Auxiliary User Interface (UI)
Pin 4 - Signal Rx 232 to host (Pin no. 3 SubD female connector) or to the
Auxiliary User Interface
Pin 5 - Digital input 1
Pin 6 - Digital input 2
Pin 7 - Digital input 3
Pin 8 - Digital input 4
J3 - Relay Connector
Pin 1 - Pole A of Relay 1
Pin 2 - Pole B of Relay 1
Pin 3 - Pole A of Relay 2
Pin 4 - Pole B of Relay 2
Pin 5 - Pole A of Relay 3
Pin 6 - Pole A of Relay 3
Pin 7 - Pole A of Relay 4
Pin 8 - Pole B of Relay 4
J5: Connection to KiWi module.
J7: Ethernet Connector (RJ45 connection)
J10 - Connector to card Readers / Printer
Pin 1 - Signal Rx 232 to the device (Pin no. 2 connector SubD male)
Pin 2 - Signal Tx 232 to the device (Pin no. 3 connector SubD male)
Pin 3 - Power supply negative pole (GND) (Pin no. 5 connector SubD male)
Pin 4 - 5 VDC
Pin 5 - CLS signal (TTL_0)
Pin 6 - Clock signal (TTL_0)
Pin 7 - Data signal (TTL_0)
Pin 8 - Power supply negative pole (GND)
J11 - Connector to Signalling Relays (optional)
J12: Connection to FingerVein biometric identification module.
Pin 1 - Do not connect
