5. To adjust backtilt up to maximum,
loosen swivel screw being careful not
to disengage threads. Hold fixture at
desired angle and firmly tighten
swivel screw.
Lens Frame
Swivel
Screw
LAMP INFORMATION
Cat. No.
Lamp Type
Max. Watts
Halogen
KLV215 T3 or T4 Bipin
50
KLV216
MR16 Bipin
50
KLV217
L.E.D.
5
Micro-Flood
®
-
KLV215/216/217
Installation Instructions
Page 2
KIM LIGHTING • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA 91716-0080 • 626/968-5666 • FAX 626/330-3861
KIM LIGHTING LIMITED WARRANTY
When installed in accordance with Kim Installation Instructions and
accepted trade practices, the following shall apply:
General Product Limited Warranty Coverage
All material and component parts used in the manufacture of Kim
Products, are warranted to be free from defects of material and/or
workmanship for a period of 1 year from date of sale, with the following
exceptions:
Auxiliary Equipment
All auxiliary equipment (such as lamps, ballasts, and transformers)
provided by and/or included in Kim Products shall carry the component
manufacturer's warranty.
Copper and Bronze Landscape Components
Copper and Bronze Landscape fixture components shall be warranted
against defects of material and/or workmanship, and failure due to
corrosion, for a period of 25 years from date of sale.
Composite In-Grade Components
Composite In-Grade fixture components installed below grade, shall be
warranted against defects of material and/or workmanship, and failure
due to corrosion, for a period of 7 years from date of sale.
Aluminum Landscape Components
Aluminum Landscape fixture components not in direct contact with soil,
shall be warranted against defects of material and/or workmanship for a
period of 3 years from date of sale. Aluminum fixture components in
direct contact with soil shall be warranted from defects of material and
failure from corrosion for a period of 1 year from date of sale.
Limit of Liability and General Conditions
Only products which are installed, used and maintained in accordance
with applicable Kim instructions, specifications and accepted trade
practices, are covered by the Kim Warranty. During the warranty period,
with proof of purchase, Kim will repair or replace with the same or similar
product, at Kim's option, without charge. Labor costs are the owner's
responsibility and are excluded from this warranty. This warranty is void
if the product is modified, tampered with, misapplied, poorly installed,
improperly maintained, or subjected to abnormal conditions.
Repair or replacement as provided under this warranty is the exclusive
remedy of the purchaser. This warranty is in lieu of all other warranties,
expressed or implied, including any implied warranty of fitness for a
particular application. Kim Lighting shall not be liable to the purchaser
for indirect or consequential damages.
How may we serve you better?
Please let us know. Visit our website at:
www.kimlighting.com
Your input matters to us.
Additional wire and connectors may be
purchased from Kim Lighting:
KLV427 #12-2 Cable
KLV432 #8-2 Cable
KLV410 Connector
KLV411 Connector
Setscrew
4. Loosen setscrew, adjust fixture rota-
tion and tighten setscrew.
To Relamp turn off/unplug and allow
to cool before replacing lamp. Re-
place lamp per chart below. Lamp
gets HOT quickly! Contact only
switch or plug when turning on.
