Page 4
Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA 91716-0080 • 626/968-5666 • FAX 626/330-3861
KIM LIGHTING LIMITED WARRANTY
When installed in accordance with Kim Installation Instructions and
accepted trade practices, the following shall apply:
General Product Limited Warranty Coverage
All material and component parts used in the manufacture of Kim
Products, are warranted to be free from defects of material and/or
workmanship for a period of 1 year from date of sale, with the following
exceptions:
Auxiliary Equipment
All auxiliary equipment (such as lamps, ballasts, and transformers)
provided by and/or included in Kim Products shall carry the component
manufacturer's warranty.
Copper, Bronze and Brass Landscape Components
Copper and Bronze Landscape fixture components shall be warranted
against defects of material and/or workmanship, and failure due to
corrosion, for a period of 25 years from date of sale.
Kim Lighting's brass components are constructed from several brass
parts that are manufactured by various methods at various times. Since
brass naturally deepens in color as it ages through the normal oxidation
process, these parts may exhibit subtle differences in coloration when the
product is new. This is normal and expected. These color differences will
be eliminated shortly after installation through the normal brass oxidation
process..
Composite In-Grade Components
Composite In-Grade fixture components installed below grade, shall be
warranted against defects of material and/or workmanship, and failure
due to corrosion, for a period of 7 years from date of sale.
Aluminum Landscape Components
Aluminum Landscape fixture components not in direct contact with soil,
shall be warranted against defects of material and/or workmanship for a
period of 3 years from date of sale. Aluminum fixture components in
direct contact with soil shall be warranted from defects of material and
failure from corrosion for a period of 1 year from date of sale.
Stainless Steel Components
Stainless steel landscape components (Lens Rings) installed in the
outdoor environment shall show signs of oxidation after 5 to 6 years of
install and is dependent on the application and its environment. A proper
maintenance and cleaning program will extend the beauty of the stainless
steel.
Limit of Liability and General Conditions
Only products which are installed, used and maintained in accordance
with applicable Kim instructions, specifications and accepted trade
practices, are covered by the Kim Warranty. During the warranty period,
with proof of purchase, Kim will repair or replace with the same or similar
product, at Kim's option, without charge. Labor costs are the owner's
responsibility and are excluded from this warranty. This warranty is void
if the product is modified, tampered with, misapplied, poorly installed,
improperly maintained, or subjected to abnormal conditions.
Repair or replacement as provided under this warranty is the exclusive
remedy of the purchaser. This warranty is in lieu of all other warranties,
expressed or implied, including any implied warranty of fitness for a
particular application. Kim Lighting shall not be liable to the purchaser
for indirect or consequential damages.
Lightvault
®
- LTV10, 20, 30 & 40 Series
Installation Instructions
How may we serve you better?
Please let us know. Visit our website at:
www.kimlighting.com
Your input is valuable to us.
8. Replace splice compartment cover and
torque screws to 30-40 in./lbs. Place
dessicant package inside housing before
connecting quick disconnect.
9. Re-install rough-in debris shield and tighten
screws snuggly to prevent dirt and water
entry. Fixture is now ready for reflector and
lens installation. Make sure all surfaces
are completely clean before installing
covers and lens rings. Any foreign objects
trapped in the gasket areas will create
potential points of entry for ground water.
Rough-In Section cont'd.
Dessicant
