Page 2
Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA 91716-0080 • 626/968-5666 • FAX 626/330-3861
LIGHTVAULT
®
- LTV Lens / Reflector
LTV30/730
Installation Instructions
How may we serve you better?
Please let us know. Visit our website at:
www.kimlighting.com
Your concerns are important to us.
MAINTENANCE Make certain electrical supply is OFF before starting lamp replacement.
1. A regularly scheduled maintenance program must be established to keep fixtures clean. Dried leaves and paper
can burn if allowed to accumulate on high temperature lenses. A buildup of dirt and other material on the lens may
cause excessive temperatures within the fixture.
2. To relamp, remove lens frame, lens and gasket. Install lamp of type and wattage shown on fixture label.
3. Clean lens gasket and frame inside and out. Before closing fixture, be sure gasket and gasket surfaces are clean
and dry. Make sure no dirt has fallen into screw holes.
4. Install lens gasket and lens frame. Coat screws with silicone grease and tighten progressively and evenly to 30
inch lbs. torque (2
K
ft. lbs.).
!
6. Loosen tilt adjustment screws, aim reflector to desired orientation and lock position by tightening tilt adjustment
screws.
7. Clean lens and gasket inside and out. Before closing fixture, be sure gasket and gasket surfaces are clean and
dry. Make sure no dirt has fallen into screw holes.
8. Install lens, gasket and lens frame. Coat screws with silicone grease and tighten opposing screws progressively
and evenly until tight.
KIM LIGHTING LIMITED WARRANTY
When installed in accordance with Kim Installation Instructions and accepted trade practices, the following shall apply:
General Product Limited Warranty Coverage
All material and component parts used in the manufacture of Kim Products, are warranted to be free from defects of material
and/or workmanship for a period of 1 year from date of sale, with the following exceptions:
Auxiliary Equipment:
All auxiliary equipment (such as lamps, ballasts, and transformers) provided by and/or included in Kim Products shall carry the
components manufacturer's warranty.
Copper, Bronze and Brass Landscape Components
Copper and Bronze Landscape fixture components shall be warranted against defects of material and/or workmanship, and
failure due to corrosion, for a period of 25 years from date of sale.
Kim Lighting's brass components are constructed from several brass parts that are manufactured by various methods at various
times. Since brass naturally deepens in color as it ages through the normal oxidation process, these parts may exhibit subtle
differences in coloration when the product is new. This is normal and expected. These color differences will be eliminated shortly
after installation through the normal brass oxidation process.
Composite In-Grade Components
Composite In-Grade fixture components installed below grade, shall be warranted against defects of material and/or
workmanship, and failure due to corrosion, for a period of 7 years from date of sale.
Aluminum Landscape Components
Aluminum Landscape fixture components not in direct contact with soil, shall be warranted against defects of material and/or
workmanship for a period of 3 years from date of sale. Aluminum fixture components in direct contact with soil shall be
warranted from defects of material and failure from corrosion for a period of 1 year from date of sale.
Stainless Steel Components
Stainless steel landscape components (Lens Rings) installed in the outdoor environment shall show signs of oxidation after 5 to 6
years of install and is dependent on the application and its environment. A proper maintenance and cleaning program will
extend the beauty of the stainless steel.
Limit of Liability and General Conditions
Only products which are installed, used and maintained in accordance with applicable Kim instructions, specifications and
accepted trade practices, are covered by the Kim Warranty. During the warranty period, with proof of purchase, Kim will repair
or replace with the same or similar product, at Kim's option without charge. Labor costs are the owner's responsibility and are
excluded from this warranty. This warranty is void if the product is modified, tampered with, misapplied, poorly installed,
improperly maintained, or subjected to abnormal conditions.
Repair or replacement as provided under this warranty is the exclusive remedy of the purchaser. This warranty is in lieu of all
other warranties, expressed, or implied, including any implied warranty of fitness for a particular application. Kim Lighting shall
not be liable to the purchaser for indirect or consequential damages.
