background image

// 

K4815

 // Pattern Generator

14p

playback by the corresponding number of semitones away from middle C.

When one of the patches from 65-128 are selected, notes received by the K4815 will trigger the start 

of playback at the beginning of the motion sequence. If you play legato, the notes will be transposed, 

but the motion will continue playing through to the end before repeating. If you play staccato, the 

motion will restart from the beginning for each note.

MIDI Controller Change

While in X/Y output mode, instead of transmitting MIDI notes, continuous controller messages will be 

sent. Controllers 16 and 17 correspond to the X and Y values of the playback ball respectively. The 

LARGE/SMALL switch  affects   the size of  the  output,  and   the MAJ/MIN  affects  the polarity   of the 

output voltages.

When MIDI controller 64 (damper pedal) is received the current playback direction is reversed just as 

with the analog DIR input.

MIDI SYSEX Messages

A series of SYSEX messages are used for software updating and loading new motions, patterns and 

scales. Currently this requires software from Kilpatrick Audio and will be sent to owners of the K4815 

who request additional or different features or require bug fixes. Please contact Kilpatrick Audio for 

more information if you would like to experiment with this feature.

User Manual

Hardware Version D/E
Firmware Version 1.1x
February 16, 2011
© 2010 Kilpatrick Audio

Summary of Contents for K4815

















Reviews: