8
◼
Checkweighing Annunciators
The OVER, ACCEPT, and UNDER annunciators are to the right of the display as described below:
WITHIN TARGET
RANGE
The LCD lights up in green; an annunciator
appears next to “Accept”
; and the scale beeps
2 short beeps.
UNDER TARGET
RANGE
The LCD backlight turns off; an annunciator
appears next to “Under”
; and the scale does
not beep.
OVER TARGET
RANGE
The LCD lights up in red; an annunciator
appears next to “Over”
; and the scale beeps
continuously.
If the display shows Err, this means weight
exceeds overload limit.
◼
SETTINGS
Backlight Setting
Press
[TARE]
and hold for 2 seconds to turn ON the backlight manually.
Press
[TARE]
and hold for 2 seconds to turn OFF the backlight manually.
Tare Setting
Place an empty container on the scale and press
[TARE]
. The display will show a net value of “0”
and
an annunciator appears under
“
NET
”
.
To clear the Tare value, press
[TARE]
with the pan empty.
Auto off Setting
Press and hold
[UNIT]
for 6 seconds until the display shows
. When
display shows
A_OFF,
press
[UNIT]
to select auto turn off time or to disable this function. Press
[ZERO]
and press
[UNIT]
to
see
End to confirm setting.
