SG03.20
Step 3
Install the Winch (D) to the
bottom of the Center Support
(B), use the two bolt sets (I).
Assembly Tip:
Unwind all of the winch cable
from the spool when
installing the winch. This will
provide additional clearance
for your hand and/or wrench
making installation easier.
Step 4
Pull out some of the cable
from the spool and let it pass
through the groove of the
Arm Support (A). Then
assemble the Pulley (G) with
one bolt set (H).
Step 5
When you install the deer
hoist to the tree, you should
tie it with the chain and the
Belt Stretcher (E). Let the
Belt Stretcher (E) pass
through U-shape groove of
the Center Support (B), then
tie it in the tree. There are
two grooves on the Center
Support (B), upper and
bottom.
