•
Do not exceed the working load limit of 300 pounds (136 kg). The manual crack is
rated to 660 pounds (299 kg). Be aware of dynamic loading! Sudden load movement
may briefly create excess load causing product failure.
•
Do not install in a location that could pose a safety hazard.
•
NEVER allow other persons to assemble, install or use this product until they have read
this manual and have developed a thorough understanding of how the product works.
•
NEVER attempt to modify this product or subject it to an installation or use for which it
was not designed. Doing so may result in damage and/or serious injury.
•
NEVER attempt to assemble, install, load or unload the rack while you are tired or
under the influence of drugs or alcohol.
•
ALWAYS wear appropriate safety gear such as ANSI-approved safety goggles and
heavy-duty work gloves when assembling, installing, loading, unloading or removing/
storing the rack.
Step 1
Assembly Instructions
Pull out the Arm Support (A),
place it perpendicular to the
Center Support (B), and then
insert one D-Shape Pin Clip
(F).
Step 2
Connect the Arm Support (A)
and the Center Support (B)
with the Diagonal Support
(C), use two D-Shape Pin Clips
(F). There are 3 holes and it
could be inserted in any of
them according to actual
situation.