7
Maintenance and Inspection:
1.
The sensor screwdriver must be operated in top condition, one day working hour must be
not more than eight hours.
2.
Please note don’t let the motor get over heated, every minute use 9 screws to operate.
3.
The frequency use of this electric sensor screwdriver is over than eight hours a day, still it needs periodically testing and
treatment.
4.
Inspect tool cords periodically and if damaged, have them repaired by an authorized service facility. Inspect extension cords
periodically and replace if damaged.
5.
Do not remove any labels. Replace any damaged label.
6.
To adjust the torque on these sensor screwdrivers. Proceed as follows :
Stop the sensor driver first and adjust it with the KL-TCG controller.
Servicing
