Kilews KTM-1000, Instruction Manual

Page: 26 / 31

KTM-1000
25
Display Features & Settings
Editing Profiles
Tapping on a profile on the profiles menu allows the user to view and
edit its attributes. To edit an attribute, the user must press the blue
label for that attribute. Once a profile has been edited, the
[Set] arrow
must be pressed in order to confirm the changes.
On the profile editing screen, a profile will show the following customizable attributes:
Profile The name of the profile.
Status
The profile ’ s status as either ‘ Active ’ or ‘ Inactive ’ . Inactive profiles are locked and must
be made active before they can be used.
Units
The units in which torque will be measured when this profile is active. Options are Ft
Lbs, In Lbs, In Oz, Nm, Kgf Cm, Kgf m, Gf Cm, and cNm.
Target Torque The desired torque value for the tool being tested with this profile.
Variance Acceptable deviation (± %) from the target torque value.
Peak Threshold
The lowest torque value that will be recognized and logged by this profile in peak
mode. Any torque measurement smaller than this value will be ignored.
Test Direction
The direction of torque that will be measured with this profile. This can be set to CW
(clockwise), CCW (counterclockwise) or both directions.
Filter
The maximum alloted period of time, in milliseconds, to find a greater peak value after
a potential peak is identified.