7
3.2 LED Display in setting mode and error code description :
Symbol
Definition
Description
Set Slow Start
Time
1.
Press▲+▼for 2 Sec, LED will display
[RC]
.
2.
Use▲or▼to increase or descrease slow start time value from 0.0 to 9.9
sec.
Set Slow Start
Speed Level
1.
Press▲+▼for 1 sec after set
[RC]
, LED will display
[SP]
.
2.
Use▲or▼to increase or descrease slow start speed level from L0 (100%,
Disable) or L1 to L9 (30%~90%).
Set Running Time
Control
1.
Press▲+▼ for 1 sec after set
[SP]
, LED will display
[Ut]
.
2.
Use▲or▼to increase or descrease the running time from 0.0 to 9.9 sec.
3.
Screwdriver running time will count down to 0 then stop.
Slow Start
Speed Level
1.
When
[SP]
set to
[L1] ~ [L9]
, indicate the slow start speed level.
No Slow Start
Function
1.
When
[SP]
set to
[L0]
, disable slow start function.
Under Voltage
Protection
1.
Screwdriver will stop when the operation voltage is lower.
2.
LED will display
[E3]
to indicate under voltage Protection.
3.
Screwdriver will disable 10 sec then automaic recovery.
Over Temp.
Protection
1.
Screwdriver will stop when the operation temperature is higher.
2.
LED will display
[E4]
to indicate over temperature Protection.
3.
Screwdriver will disable 10 sec then automaic recovery.
Stall Protection
1.
Screwdriver will stop when motor is abnormal stalled after start.
2.
LED will display
[E5]
to indicate stall protection.
3.
Screwdriver will disable 10 sec then automaic recovery.
Push plate Error
1.
Screwdriver will stop when push plate change between motor running.
2.
LED will display
[E7]
to indicate abnormal operation.
3.
Switch push plate back to recovery.
Brake Error
1.
Screwdriver will stop when the abnormal brake signal appeared before
start.
2.
LED will display
[E8]
to indicate abnormal brake error.
3.
Check and fix the brake mechanism to recovery.
Memory Error
1.
Screwdriver will stop when the internal flash memory fail.
2.
LED will display
[E9]
to indicate internal flash memory error.
3.
Screwdriver will disable 10 sec then automaic recovery.
Summary of Contents for KL - SCBSN
Page 2: ......
Page 10: ...8 4 Techical Diagram...
