18
MAINTENANCE & CLEANING
Turn off the POWER before performing maintenance and cleaning.
CLEANING AND MAINTENANCE THE BRUSH
Using the dry cotton to wipe the
brush to remove the dust. Swing the brush by hand and adjust the
height of the brush to make the brush in touch with screw heads.
Replace the brush when brush hair is too worn and cannot wipe
down screws in an improper position.
CLEANING AND MAINTENANCE THE RAIL
Withdraw the rail assembly, clean the
rail groove and top of the rail (area for screws flow) with a clean thin
cotton cloth soaked with alcohol or benzene. Use the Allen Key to
check if the screws for the parts of rail assembly are fastened.
INTERIOR CLEANING
After cleaning the rail assembly, take out any screw or foreign
material inside of machine, and clean whole interior parts, walls
particularly the motor, PCB and gear to prevent effecting against
machine functions.
OPTIONAL PARTS
：
Please use genuine parts to ensure products quality and avoid influences
caused against performance of this machine.
REMARK
：
When using screw of special types or other than specified, please consult
our distributors.
