22 Precautions for Safe Testing
TOS8030
3.3.2
For High Voltage Output
The TEST lamp goes on during testing. In this case, the DANGER lamp also lights
up, alerting the operator that high voltages are being output.
Fig. 3-5
Indicators Lit during Testing
When the DANGER lamp is lit
■
Do not touch the DUT, test lead, test probe, or any high-volt-
age-charged sections at the periphery of the output terminals.
Contact with any of these areas may result in electric shock.
Never attempt to touch the PVC covering of the alligator clip of a test lead. (The
dielectric strength is inadequate to prevent shock.)
Fig. 3-6
Test Lead
■
Do not leave the tester while it is operating.
A person who operates the tester must remain with it until the test is complete. If he/
she must leave the tester, always turn the POWER switch off.
■
Do not turn the POWER switch off.
Except in emergencies, do not turn the POWER switch off while output is being
generated.
Lit
During testing, never attempt to touch
the alligator clip of a test lead.
WARNING
Summary of Contents for TOS8030
Page 55: ......
