Kikusui TOS5050, Operation Manual, Page: 129 / 139

Chapter 9 SPECIFICATIONS
9-13
Model TOS5101
Ambient temperature Specification range 5 to 35 ˚ C (41 to 95 ˚ F), 20 to 80% RH
and humidity Operable range 0 to 40 ˚ C (32 to 104 ˚ F), 20 to 80% RH
Storage range –20 to 70 ˚ C (–4 to 158 ˚ F),
≤
80% RH
SAFETY Conforms to the requirements of the following directive
(Notes 7 and 8) and standard.
• Low Voltage Directive 73/23/EEC
• EN61010-1
Class I
Pollution degree 2
• UL1244
(The UL-approved products with input voltage of
120VAC satisfy the UL1244 standerd.)
Electromagnetic compatibility (EMC) Conforms to the requirements of the following directive
(Note 7) and standard.
EMC Directive 89/336/EEC
EN61326
EN61000-3-2
EN61000-3-3
Under following conditions
1. Used HV test leadwires which is supplied.
2. No discharge in testing.
3. Used the shielded cable which length is less than
three meters when the SIGNAL I/O is used.
AC line power Voltage and 100V
±
10%, 50/60 Hz
requirements frequency (Factory modification options:
Nominal 110/120/220/230/240V)
Power consumption
Without load
(READY status)
100V line
≤
30VA
110V line
≤
40VA
120V line
≤
40VA
220V line ≤ 50VA
230V line
≤
50VA
240V line
≤
50VA
With rated load
100V line Approx. 600VA
110V line Approx. 600VA
120V line Approx. 600VA
220V line Approx. 610VA
230V line Approx. 610VA
240V line Approx. 610VA
Insulation resistance
≥
30 M
Ω
, with 500V DC
Note 7: Only on models that have CE marking on the panel.
Not applicable to custom order models.
Note 8: This instrument is a Class I equipment. Be sure to ground the protective conductor terminal
of the instrument. The safety of the instrument is not guaranteed unless the instrument is
grounded properly.