2
PL02-TOS
Operating Procedure
Be sure to turn off the Tester before connecting the
wires.
1
Connect the AC/DC24V connector of the PL02-TOS and the STA-
TUS OUT terminal of the Tester.
2
Set the Tester so that a signal is output from the STATUS OUT termi-
nal when a test is in progress.
3
The PL02-TOS is activated when a test is started on the Tester.
■
Connection example
• A rubber magnet is attached to the bottom of the
PL02-TOS to fix it in place. However, do not place the
PL02-TOS on a slanted surface, uneven surface, or a
place with vibrations. The rubber magnet cannot with-
stand strong shock. Be careful not to drop the PL02-
TOS by carrying out acts such as yanking on the con-
nection cord. Such acts can damage the warning light.
• If the cover needs cleaning, gently wipe using a soft
cloth with water-diluted neutral detergent. Do not use
volatile solvents such as thinner or benzine.
WARNING
Tester
rear panel
Less than 3 m
PL02-TOS
STATUS OUT
AC/DC24V
+
COM
CAUTION
