Kikusui PFX2500 Series, Operation Manual

Page: 4 / 144

4
PFX2512
• Parallel cable for electronic loads (
PLZ-5W, PLZ-4W
)
For the safe use and safe maintenance of this product, the
following symbols are used throughout operation manual and
on the product. Note the meaning of each of the symbols to
ensure safe use of the product. (Not all symbols may be used.)
or
Indicates that a high voltage is used here.
Touching the part causes a possibly fatal electric shock. If
physical contact is required by your work, start work only
after you make sure that no voltage is output here.
DANGER
Indicates an imminently hazardous situation which, if
ignored, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if
ignored, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if
ignored, may result in slight injury or damage to the
product and other property.
Model Description Length Quan
tity
PC01-PLZ-4W 20-core flat cable
For between PLZ-4Ws and
between boosters Approx.
30 cm 1 pc.
PC02-PLZ-4W 20-core flat cable
For between a PLZ-4W and
booster Approx.
45 cm 1 pc.
PC01-PLZ-5W
1
1. One cable is included for the PLZ2405WB (booster).
Parallel operation signal cable
kit
For between PLZ-5Ws Approx.
30 cm 1 pc.
Ope
Indicates a prohibited act.
Indicates a warning, caution, or danger. When this
symbol is marked on the product, see the relevant
section in this manual.
Protective conductor terminal.
Chassis (frame) terminal.
On (power supply).
Off (power supply).
In position of a bi-stable push control.
Out position of a bi-stable push control.
Indicates that this product conforms to the
requirements of the Waste Electrical and Electronic
Equipment Directive.
In the EU, this product cannot be disposed of as
domestic household waste.
When disposing of this product, follow the Waste
Electrical and Electronic Equipment (WEEE)
Directive.
In areas outside of the EU, dispose of it as per the
instructions of the local authorities.
Safety Symbols