Kikusui PAT-T Series, Manual

Page: 134 / 158

SYST:ERR
Reads the oldest error information or event information from the error queue. The error
queue can store up to 255 errors. -> Tutorial
The error queue is cleared using the *CLS command.
Command
SYSTem:ERRor[:NEXT]?
Response
Returns the oldest error or event information in the error/event queue in response to
SYST:ERR? as follows:
(Example) When there is no error or event
+0"No error"
(Example) When a command that cannot be executed in the current operating condition is
received
-221,"Settings conflict"
Overview
Introduction
Setup
Installing the VISA library
Interface Setup
Overview of Messages
Command Syntax
Parameters
Default settings
Command
(function search)
IEEE488.2 Common Commands
Output Setting
Protection and Clear the Alarm
System Configuration
Preset Memory Function
Setting Changes using triggers
Output On/Off Delay
Measurement
System
Register
Command
(ABC search)
A C F I M
O S T V *
Command
(Sub-system search)
SOURce
OUTPut
MEASure and FETCh
TRIGger
MEMory/ SENSe
SYSTem
STATus
IEEE488.2 Common Command
List (PDF)
Appendix
A List of Errors
Processing time of main
command
Tutorial
Turning the Power On and
Resetting the Instrument
Output programming
Using Triggers
Status Monitoring
Error Checking
Visual Basic 2008
PAT-T series Communication Interface Manual
KIKUSUI ELECTRONICS CORP. 134/158