Kikusui DPO2212A, Operation Manual

Page: 37 / 54

28 DPO2212A
Table 3-3
Output voltage control Output current control
＊1 PAA ○ ×
PAB-A ○ ○
PAD-L(-LP)
TYPE 0・I
1
・I
2
PAD-L(-LP)
TYPE I
3
・II・III・IV・V・VI
PAE ○ ○
PAL(-P) ○ ○
PAN(-A) ○ ○
PLZ-W — ○
PLZ-W2 — ×
PLZ-W2A — ○
PLZ-WU — ○
PMC-A × ×
×
×
＊2
＊2 ×
○
○
:The front-panel control affects the remote setting.
×
:The front-panel control does not affect the remote
setting.
*1:No guard caps accompany the PAA Series Power
Supplies.
To install guard caps on them, modification is
necessary.
For the modification, consult your Kikusui agent.
*2:Of PAD500-1.2L or PAD600-1.5L, the output voltage
control alone affects the remote setting.
3-5. Instructions for Digital I/O
3-5-1. Interruption
The digital I/O connectors of the DPO2212A have 4-bit
interrupt signal input pins and deliver a service
request (SRQ) signal onto the GP-IB bus when an
interruption has occurred. They also deliver a status
byte in response to poll.