background image

Kiev-19M                                                                                                                                                      Instructions for Use 

 

 

– 2 – 

The focusing is carried out with the aid of a microscreen and ground glass. 
To  decrease  an  eye  fatigue  during  photographing  the  camera  viewing  system  has  the  minus  1 

diopter. The dioptric lens can be installed instead the eyepiece protective glass. 

The shutter cocking mechanism is interlocked with the film transport mechanism. 
The  picture  counter  counts  off  the  number  of  the  pictures  taken  and  is  automatically  reset  to  the 

initial position when the back is opened. 

The  exposure  meter  of  the  camera  of  system  TTL  enables  you  to  determine  the  exposure  by  the 

light passing throught the lens with the diaphragm fully opened. 

The  working  range  of  the  exposure  meter  is  equal  to  4.8...13900  cd/m

2

  when  the  regular  lens 

(relative aperture 1:2), is used. White determining the exposure, take into account the film sensitivity 
value in the range from 25 to 3200 units as per GOST/ISO. 

The cell of type PX-28 or the set  of cells whose voltage is  6 V (diameter 13 mm, height  25 mm) 

serves as a power source for the exposure meter. 

The camera is provided with a synchronizer for combined operation with flash lamps. 
The camera back is folding, hinged and can be removed from the camera, when necessary. 
The camera design comprises the ergonomic attachment. 
 

1.2. Camera Care 

The KIEV-19M camera is a modern opto-mechanical instrument fitted with electronics. Handle the 

camera  with  care,  keep  it  clean,  protect  it  from  jolts,  impacts,  dust,  moisture  and  sharp  temperature 
variations.  In  shooting  in  the  frosty  weather  (below  minus  10°C),  do  not  leave  the  camera  outdoors, 
carry it under your outdoor clothing and take it out only for the time of shooting. 

Having  brought  the  camera  from  frost  into  the  warm  premises  do  not  take  it  out  of  the  case 

immediately, let it get warm in the case for two hours to avoid the sweating of parts, optics especially. 

Do not touch the camera optics with your fingers to avoid getting it dirty. 
Try to avoid removing the lens from the camera without special need since it would result in dust 

and dirt getting onto optics’ surfaces. 

Wipe  the  optics’  surfaces  with  clean  soft  cloth  or  cotton  wool  slightly  moistened  with  rectified 

alcohol or ether. The mirror  and  Fresnel lens may  be  cleaned only on a special need  with  a soft dry 
brush. 

The  electrical  contact  in  the  battery  recess  is  to  be  wiped  with  a  soft  cloth  or  cotton  wool  with 

alcohol.  Take  the  cells  out  of  the  camera  and  keep  them  separately  in  case  of  long  interruptions 
(weeks, months) between shots. 

Do not exert the undue force in manipulating the camera. 
Any repair and adjustment of the camera are to be carried out only by the specialists. 
 
 
 

2. Delivery set 

Camera with MC HELIOS-81H lens 

Lens cap (front) 

Shoulder strap 

Guide clip insert 

Eye-cup 

Strap with screw 

Case 

Packing box 

Instructions for use 

 
 
 
 
 

Summary of Contents for 19(M)











Reviews: