A
Page 18 / 30
Product Description
RPW404P-FTL
Datasheet 1.10-65.030-01-EN
Issue 2017-04-03
Automatically switching between comfort and economy mode
Automatic switching between comfort or economy mode is performed according to the utilization
profile learned.
The utilization profile is generated automatically, and is continuously and dynamically adjusted and
optimized.
This is displayed by the
comfort mode or
economy mode icons. The “Auto” icon also
appears in the display.
Presence/absence is recorded by the occupancy sensor in order to learn the utilization profile.
The room control module continuously adapts the operating mode depending on real utilization
behavior.
Closing the valve manually
To prevent the formation of mold, it is necessary to adequately ventilate the room.
To save on heating costs, there is also an option to have the wireless small actuator close the valve.
►
Press and hold the “
” button for 5 seconds.
The “window” icon appears on the display and the “Auto” icon
disappears from the display.
The wireless small actuator closes the valve.
When the room has been sufficiently ventilated, the room temperature control switches back to
automatic mode.
►
Hold down the button “
" for 5 s.
The “Window” icon disappears from the display.
NOTE
If the control has not been manually reset to automatic mode, it will be reset upon changeover to the
next day.
Restoring defaults
When the defaults are restored, the learned utilization time profile and the wireless connections are
deleted and all settings are restored to the factory settings.
►
Press the “Setting button” for 5 seconds.
The text “
RES
” appears briefly and the display goes blank.
The room control module is now switched off.
