background image

20

Malfunctions

Issue 2015-01-09

NOTE

Operating and malfunction messages have priority over the 12/24 hour display.

Radio communication with at 
least one taught-in radio 
partner has been interrupted for 
more than 

four

 

hours

 and a 

synchronization has failed.

The wireless icon is also no 
longer displayed if wireless 
communication to 

all

 taught-in 

radio partners is interrupted.

Check the battery level of the 
MD15-FTL-902.

Replace the batteries in the 
MD15-FTL-902 if necessary or 
contact your service technician.

Wireless communication to the 
taught-in EnOcean system 
gateway is interrupted.

The battery level of at least one 
MD15-FTL-902 is too low 
(<10%).

If no signal is received from the 
MD15-FTL-902 for a long 
period of time because the 
batteries are dead, the display 
switches to 

.

Replace the batteries in the 
MD15-FTL-902. For more infor-
mation, see the operating 
instructions for the 
MD15-FTL-902.

Room control module faulty, 
supersedes all other 
messages.

Please contact your service 
technician.

The wireless status indicator is 
not displayed.

No wireless connection exists.

No taught-in radio partner 
exists.

All radio partners are faulty.

Please contact your service 
technician.

Summary of Contents for RBW322-FTL-902































Reviews: