A
Page 18 / 22
User Manual
RBW322-FTL-315
Datasheet 1.10-60.315-09-EN
Issue 2012-08-16
Accessories and Spare Parts
NOTE
Contact your Kieback&Peter representative if you have any questions regarding accessories or spare
parts.
Wireless Interface
Wireless communication with the MD15-FTL is cyclical, bidirectional and includes an intelligent
synchronization process.
If the wireless communication between the RBW322-FTL-315 and the MD15-FTL-315 is interrupted,
an internal resynchronization procedure starts automatically.
NOTE
This product uses only EnOcean wireless telegrams.
Only the MD15-FTL-315 can be used as a wireless partner.
Compliance Statement
This device complies with section 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference that may cause undesired operation.
Modifications not expressly approved by this company could void the user‘s authority to operate the
equipment.
Radio Frequency (RF) Signal
The wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed
the emission limit for exposure to radio frequency (RF) energy set by the OET Bulletin 56
Supplement C in the USA and by the Ministry of Health (Canada), Safety Code 6 in Canada. These
limits are part of comprehensive guidelines and established permitted levels of RF energy population.
These guidelines are based on the safety standards previously set by international standard bodies.
These standards include a substantial safety margin designed to assure the safety of all persons,
regardless of their ages and health.
This device and its antenna may not be located too close to or operated in conjunction with any other
antenna or transmitter.
This device is capable of compliance with localized specific absorption rate (SAR) for uncontrolled
environment/general public exposure limits specific in ANSI/IEEE C95.1-1992 and has been tested
in accordance with the measurement procedures specified in IEEE Std. 1528-2003 December 2003.
Batteries:
2 replaceable 3.6 V AA lithium batteries
Screws:
(do not use any counter-
sunk-head screws)
Screw head diameter: 2.2 inches
screw head height: 1 inch
nominal diameter: 0.1 inch
Wall plugs:
fitting to the specified screws
Two-sided adhesive tape:
3.8 inches x 3.8 inches
