background image

 

Remove unit from packaging.  Check for 
any concealed shipping damages prior to 
assembly.  If there is any damage, call 
Kidzpace immediately at 1-800-668-0206

Remember you have 48 hours after 
delivery to report any damage.  
 
Step 1: 
 

Move interactive to desired location. This will 
probably require two people. You will need 
access to rear door prior to final placement of 
the unit. Leg levelers are located on the 
bottom of the unit and can be adjusted for 
uneven flooring by screwing the legs in or 
out. 
 

 

 

 
Step 2: 

 

 
Rear door provides access for game system 
and software along with power bar and 
wiring. A padlock (not supplied) should be 
added to the hasp for increased security. 

 

 

 

 
Step 3

:  

 
Game system software may be shipped in a 
separate bag with these installation 
instructions and can be installed at this time. 
If you have any questions on game system 
operation please refer to the supplied 
installation binder or contact our service 
department at 1-800-668-0206. 
 
 
 
 
 

            

 

 
 

 

         

KIDZPACE INTERACTIVE INC.

 P.O. BOX 550 Collingwood, Ontario, Canada L9Y 4B2 

NORTH AMERICA – Tel (705) 444-2300 * Fax: (705) 444-0007 * Toll-Free 1-800-668-0206 

INTERNATIONAL – Tel: 001-705-444-2300 * Fax: 705-444-0007 

* Website. www.kidzpace.com 

Summary of Contents for Pipedream Racer








Reviews: