Kidzpace Interactive
Entertainment Center – Assembly Instructions
Kidzpace Interactive Inc.
P.O. Box 550, Collingwood, Ontario, Canada L9Y 4B2 Tel
(705) 444-2300
– Fax
(705) 444-0007
– Toll Free
1- 800- 668- 0206
Step 7:
Plug the grey cables coming from
the dance pads into the new brain
box. The pad on the left should be
plugged in to the slot marked 1 and
the pad on the right should be
plugged onto the slot marked 2.
Plug in the brain box power cord.
(Use the same power cord from
your existing brain box.)
Step 8:
Plug the brain box controller cables
into the Sony Playstation2. The
cable marked 1 should go in the
Player1 slot (beneath the memory
card) and the cable marked 2
should go in the Player2 slot.
NOTE: EVEN IF YOU HAVE A
SINGLE DANCE PAD YOU NEED
TO PLUG BOTH CABLES INTO
THE SONY PLAYSTATION2 OR
YOUR DANCE PAD WILL NOT
FUNCTION PROPERLY.
Step 9:
If you have received a game with
your retro kit you will need to put it
into the Sony Playstation2.
YOU
MUST REPLACE THIS GAME OR
YOUR DANCE PADS WILL NOT
FUNCTION PROPERLY!
Reinstall your monitor, close and
lock the cabinet door.
