Kidzpace Interactive
Entertainment Center – Assembly Instructions
Kidzpace Interactive Inc.
P.O. Box 550, Collingwood, Ontario, Canada L9Y 4B2 Tel
(705) 444-2300
– Fax
(705) 444-0007
– Toll Free
1- 800- 668- 0206
KIDZDANCE GENERAL MAINTENANCE INSTRUCTIONS:
The dance pad should be regularly examined for damage. Check for any worn or
loose components on a regular basis.
KIDZDANCE CLEANING PROCEEDURES
Units should be cleaned with a mild degreaser at least once a week. Once a month
it is suggested the sensors on the inside of the frame be carefully cleaned with a
mild degreaser and a Q-tip.
Step 1:
Using a flat head screwdriver or a coin
remove the two screws located at the
rear corners of the dance pad frame.
Step 2:
Have one person lift the frame while
another mops the decal surface clean of
any food, dirt, pop or debris.
Step 3:
With the decal surface clean you can
lower the dance pad frame to the floor
and secure to the floor using the 2
screws and a flat head screwdriver or a
coin.
WATER WILL DAMAGE THE SENSORS IN THE DANCE PAD FRAME.
DO NOT MOP THE DECAL SURFACE WITH OUT LIFTING THE
DANCE PAD FRAME.
DO NOT USE AMMONIA-BASED CLEANERS, SCOURING
COMPOUNDS, SOLVENTS SUCH AS ACETONE, GASOLINE, ETC. AS
THESE WILL ALL DAMAGE YOUR DANCE PADS.