![background image](http://html1.mh-extra.com/html/kidwell/nobis-krwynob01a0/nobis-krwynob01a0_user-manual_1966360018.webp)
18
6
Insert the leg divider – see PARTS no.5, into the slot of the feeding tray located at the
bottom (see drawing), after hearing a “click” sound, it will mean that the leg divider
is securely connected to the tray
7
Hold the adjusting button under the feeding tray and aligning it with the guideway
on both sides to the armrest and connect the feeding tray with the seat. The upper
feeding tray can be removed for cleaning
USE
HARNESS
8
You can change the length of the harness to match the weight and height of a child
by either pulling or loosening the straps. To release the harness, push the button
on the buckle.
The first step after inserting a child into the chair should be to fasten the seat belts,
and make sure that they are well-fitting: close to the body but with enough space
for the child to sit comfortably.
WARNING:
Make sure that the child is not touching any part of the buckle while
it is being strapped-in.
CHAIR TRANSITION
9
A. To switch the high chair into a low chair unscrew the screws connecting the upper
and lower wooden frame legs with the use of an Allen key and pull out the lower
wooden legs. To unscrew the legs follow step 1 but in reverse order. When the child's
height allows it to sit freely in a low chair, it is recommended to unscrew the footrest.
ATTENTION:
Keep the screws, the small and large footrest for future use
4
Use the big and small footrest with the 4 short screws (PARTS no. 8). Connect
the small footrest to the upper holes, positioned on the A and B upper wooden frame
and tighten the screws. Continue with the larger footrest which is located beneath
the small footrest.
5
The front part of the seat should be facing the footrest. Put the seat on the top of
the wooden frame - 4 holes at the bottom of the seat should be aligned with the 4
holes on the wooden frame. Install the large screws (PARTS no. 10) from the bottom,
and tighten them with the Allen key.
WARNING:
The screws must be properly tightened, otherwise, it will a
ff
ect the stability
of the seat.
Summary of Contents for NOBIS KRWYNOB01A0
