KIDWELL FOSAMAV01A1, User Manual, Page: 23 / 44

23
• The safety seat should be installed in seating places classifi ed in the universal
category in the vehicle owner’s manual, using the basic arrangement of belts.
• For built-in car seats, instructions may be placed on the product during usage
• The seat should not be used on seats with airbags (SRS)
• Before every journey, check that the child safety seat is correctly fastened
• Please follow the instructions on the use of child restraint systems in the vehicle
user’s manual
• Do not use or transport the seat without fastening it in the vehicle seat
• To avoid damage, it is recommended that you do not jam the seat between solid
parts of the vehicle (doors, seat adjustment guides, etc.).
• Do not place heavy, sharp-edged objects or anything else on the seat that could
damage the upholstery or a
ff
ect the functionality of the seat.
• Cars with seat covers made of delicate material (eg leather, Velor, etc.) may show
signs of wear as a result of using the seat. In these cases it is recommended to use
protective pads (they are not part of this product).
• To avoid injury, make sure the child is away from the installation location.
• Stop using the product when the child exceeds the designated weight or height
• Do not use the product if any parts were missing or were damaged during assembly
• Do not pick up the product while the child is still in it
• Do not put any objects on the product that may threaten its proper functioning
or objects that could harm the child
• The back seat is the safest place to install a car seat.
• Make sure that all components are fastened correctly and the child seat is not
latched by a folding seat or a closing door.
• Do not remove the shoulder pads, they are important for the child’s safety and
comfort
• Check the seat belts periodically, paying special attention to the attachment points,
seams and adjusting devices.
• In urgent cases, it is important to quickly detach the child from the seat. This means
that the buckle of 5-point belts is not very resistant to child manipulation. Teach your
child not to play with the release button.
• After installing the seat and fastening the child with the belt, make sure that the belt
buckle is in the correct position, which guarantees a secure attachment. The buckle
should be next to the lower belt guide. If the buckle is pulled across the lower belt
guide and into the seat, choose a di
ff
erent place to install the seat in the car.
• The safety function of the seat is safety, therefore it is recommended to carry out
checks in the event of even the slightest damage (e.g. falling to the ground).
• Regularly check all important parts of the seat for damage. In particular, make sure
that all mechanical parts are fully functional.
• Do not use any lubricants on the product. Such action may damage the proper
functioning of the product, which means that the child could get hurt.
• The child should get in and out of the safety seat with the help of an adult and only
from the pavement side.
• The tighter the straps cling to the child’s body, the greater the child’s safety level,