KidKraft P280093 Installation And Operating Instructions Manual Download Page 4

About Our Wood

KidKraft Netherlands B.V. uses only premium playset lumber, ensuring the safest product for your children’s use.  Although 
we take great care in selecting the best quality lumber available, wood is still a product of  nature and susceptible to weathering 
which can change the appearance of  your set.

What causes weathering? Does it affect the strength of my Play System?

One of  the main reasons for weathering is the effects of  water (moisture); the moisture content of  the wood at the surface is 
different than the interior of  the wood. As the climate changes, moisture moves in or out of  the wood, causing tension which can 
result in checking and or warping. You can expect the following due to weathering. These changes will not affect the strength of 
the product:
1.   

Checking 

is surface cracks in the wood along the grain. A post (4” x 4”) will experience more checking than a board (1” x 4”) 

because the surface and interior moisture content will vary more widely than in thinner wood.

2.   

Warping

 results from any distortion (twisting, cupping) from the original plane of  the board and often happens from rapid 

wetting and drying of  the wood.

3.   

Fading

 happens as a natural change in the wood color as it is exposed to sun-light and will turn a grey over time.

How can I reduce the amount of weathering to my Play System?

At the factory we have coated the wood with a water repellent or stain. This coating decreases the amount of  water absorption 
during rain or snow thus decreasing the tension in the wood. Sunlight will break down the coating, applying a water repellant or 
stain on a yearly basis is important maintenance.  (see your local stain and paint supplier for a recommended product)
Most weathering is just the normal result of nature and will not affect safe play and enjoyment for your child. However if you are 
concerned that a part has experienced a severe weathering problem please call our consumer relations department for further assistance.

Please complete your product registration online at https://prdregistration.kidkraft.com/ to receive 

important product notifi cations and assure prompt warranty service.

5 Year Limited Warranty

KidKraft Netherlands B.V. warrants that this product is free from defect in materials and workmanship 

for a period of one year from the original date of purchase. In addition, lumber is warranted for 5 

years against structural failure due to rot and insect damage. All other parts, such as hardware, swings, 

rides, accessories, and slides carry a one-year warranty only.

This warranty applies to the original owner and registrant and is non-transferable.

Regular maintenance is required to assure the integrity of your Play System.  Failure by the owner 

to maintain the product according to the maintenance requirements may void this warranty. This 

warranty does not cover any inspection cost.
This Limited Warranty does not cover:

• Labor for replacement of any defective item(s);

• Incidental or consequential damages;

• Cosmetic defects which do not affect performance or integrity;

• Vandalism; improper use or installation; acts of nature;

•  Minor twisting, warping, checking, or any other natural occurring properties of wood that do not 

affect performance or integrity.

KidKraft Netherlands B.V. products have been designed for safety and quality. Any modifi cations 

made to the original product could damage the structural integrity of the unit leading to failure and 

possible injury. KidKraft Netherlands B.V. cannot assume any responsibility for modifi ed products. 

Furthermore, modifi cation voids any and all warranties.
This product is warranted for 

RESIDENTIAL USE ONLY

. Under no circumstance should a KidKraft 

Netherlands B.V. Play System be used in public settings such as schools, churches, playgrounds, 

parks, day cares and the like. Such use may lead to product failure and potential injury. Any and all 

public use will void this warranty.

This Warranty gives you specifi c legal rights. You may have other rights as well which vary from state to state or

province to province. This warranty excludes all consequential damages, however, some states do not allow the

limitation or exclusion of consequential damages, and therefore this limitation may not apply to you.

 

4                                                             

[email protected]   

10 Year Limited Warranty

10

 4 

[email protected]

Summary of Contents for P280093















































Reviews: