background image

INSTALLATION AND OPERATING INSTRUCTIONS

GREYSTONE COTTAGE PLAYHOUSE – P280093

Rev 08/14/2017

Table of Contents

Warnings and Safe Play Instructions  .  .  .  .  .  .  .  .  .  . pg . 2
Instructions for Proper Maintenance   .  .  .  .  .  .  .  .  . pg . 2
Keys to Assembly Success   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . pg . 3
About Our Wood – Limited Warranty  .  .  .  .  .  .  .  .  . pg . 4
Battery Instruction and Warranty   .  .  .  .  .  .  .  .  .  .  .  . pg . 5
Keys to Quick Assembly   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . pg . 6
Part ID   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . pg . 7
Step-By-Step Instructions   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .pg . 12

To reduce the risk of serious injury or death, you must read and 

follow these instructions. Keep and refer to these instructions 

often and give them to any future owner of this play set. 

Manufacturer contact information provided below.

CAPACITY - 5 Users Maximum, Ages 2 to 10.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day cares 

or parks.

WARNING

Olympisch Stadion 29
1076DE Amsterdam
The Netherlands
Email: [email protected]
Phone: +31 20 305 8620 M-F from 09:00 to 17:30

(GMT+1)
For online parts replacement visit https://parts.kidkraft.eu/

 1.7m 

 1.1m 

 

2011

6'-7"  

2-4 Hrs

10 - 12 Hrs

FOR FORT & SWING

TWO PERSON  

ASSEMBLY

10 - 12 Hrs

FOR FORT & SWING

3 - 5 Hrs

Summary of Contents for P280093















































Reviews: